Inside door panel remove

je2wheeler

New member
Joined
Sep 7, 2021
Messages
1
Reaction score
0
Points
0
I have been studying how the door panel comes off, after I have removed the two plastic access dodads and all visible screws and upper door lock pull, It seems the panel should come off after freeing any hidden clips that I can not see and am afraid of snapping something off in the processes.
In other words - - HELP!
 

melsg5

Staff member
SUSTAINING MEMBER
Joined
Dec 8, 2008
Messages
22,998
Reaction score
358
Points
83
(1) Remove the inside door handle bezel plug. This is the trim behind the door handle. Will find a screw there.

2) Screw at the end of the trim panel, door openning end.

3) Remove the door trim panel cover. This in the piece just forward of the handle. Will find two screws there.

4) Using a door trim clip remover, remove the trim panel with the 9 retainers. Keep near the door.

5) Pull up on the door lock retainer to disengage

(6) Disconnect the electrical connectors.
 

cammerjeff

Active member
Joined
Nov 5, 2013
Messages
797
Reaction score
61
Points
28
Location
Belleville MI
exactly as posted unless yours is an early 2006. Then it it slightly different. I have had the door panels off of my early 2006 & my 2009.
 
Top