1992 sunbird front headlight system

robjackster

New member
Joined
Feb 5, 2014
Messages
4
Reaction score
0
Points
0
Location
Toronto, Canada
i found a hideaway headlight system for a 1990 sunbird gt and i thought it would be cool if i had hideaways on my 92 sunbird SE but im not quite sure if this is entirely possible. if anyone could help with this situation it would be much appreciated
 

Attachments

  • $_20.JPG
    $_20.JPG
    76.7 KB · Views: 146
Last edited:
Searched but with no luck, I guess its a unbolt / bolt on deal for you to try.

Dont know if the hood, bumper or core support is the same.

I'll ask on the JBody forums.

Doug in P.R.:cool:
 
Two replies from the JBody forum:

"Need the headlight assembly, both headlights and the relay. Not sure about the fenders or hood on the 88. As long as it has the 2ndgen setup you are fine. Unless your going with a 1st gen setup."


"Not the relay, the controller. They're actually two different things. You'll also need the wiring harness. It plugs into the factory firewall connector but has the additional connectors for the door motors and controller. Body wise it should be a direct swap. "


Hopes this helps...Doug in P.R.:cool:
 
Back
Top