2000 Grand-Am Slipping or What?

hkr321hkr

New member
Joined
Apr 22, 2011
Messages
1
Reaction score
0
Points
0
Hi forum! I am a F150 forum member as well and have many step by step how to jobs posted that I created. So check them out if you need to!,

I am having the some issue. I can go into drive and reverse sometimes. Seems like If I start the car, hurry and move the car into my shop, then put it in reverse then drive then it wont move. So I tried and my theory is if I start the car and hurry and move it, it will move but after 5 minutes or less it will not move anymore unless I rev the motor a little it seems to wanna move but wont really. Every time I first start the car I can move it but it eventually wont move.
I am not your average joe. I have been a mechanic for 13 years just never took a trans apart or had the opportunity to. All my engine swaps or work needed has never been related to a transmission problem. I have had great luck with customers!
Any Ideas would be great and please dont tell me to change fluid or filter I have already. I also triple checked my connections after replacing the engine. Also No leaks.

Yes motor was changed due to customer having a rod knock. Engine runs great! No Codes!
I need to test drive this car and get it back to the customer asap someone please have a clue!
 
I'm assuming this is occuring after you swapped the engine? Pull the large round connector on the top of the trans and make sure you don't have terminals backed out or bent over.
 
Back
Top