Please consider whitelisting my site in your ad blocker. If you must keep it running here, please support this endeavor and select a support plan - which starts at only $0.16 cents per day. I'm not asking for much. I just need a little help. Thank you. Click here to select a support plan.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
2001 Pontiac Montana camshaft position sensor
- Thread starter tnchris81
- Start date
planenut_2000
New member
- Joined
- Feb 14, 2011
- Messages
- 121
- Reaction score
- 0
- Points
- 0
It is located on the RH side of the engine, beneath the PS pump. You will need to remove the PS pump for access,( 3 bolts thru the pulley) the sensor is held in place by one bolt.
iateadonut
New member
- Joined
- Sep 5, 2011
- Messages
- 3
- Reaction score
- 0
- Points
- 0
how did you do on this?
i just replaced mine last night, and it took so damn long to get one of the bolts back into the power steering pump. eventually my buddy figured out how to line it up - we took the two easy bolts and put them in without tightening them all the way, and then he was able to line up the third bolt by looking at it through a mirror, and even after we lined it up it was pretty tough to screw back in.
we eventually accomplished it, though.
is there a better way to do this? some trick to it?
(by the way, it was a 2000 pontiac grand am)
i just replaced mine last night, and it took so damn long to get one of the bolts back into the power steering pump. eventually my buddy figured out how to line it up - we took the two easy bolts and put them in without tightening them all the way, and then he was able to line up the third bolt by looking at it through a mirror, and even after we lined it up it was pretty tough to screw back in.
we eventually accomplished it, though.
is there a better way to do this? some trick to it?
(by the way, it was a 2000 pontiac grand am)