S
skruffy
We have a 05 Pontiac SV6 and just had all the sensors replaced for the ABS system and continue to have problems with the light still coming on!!!!!! Any ideas???? besides changing the repair shop which is obvious.
Please consider whitelisting my site in your ad blocker. If you must keep it running here, please support this endeavor and select a support plan - which starts at only $0.16 cents per day. I'm not asking for much. I just need a little help. Thank you. Click here to select a support plan.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
S
silverwolf
check the fluid level in the master
G
gmburd
abs light
i constantlly had aproblem with my abs and I was told I needed new wiring. This happens during wet weather. I sprayed the connectors at the hubs and blew them out with an air hose. I also sprayed electonic cleaner into the hubs ( don't know if that helps, but I haven't had a problem for 6 mos.
Prior to that my abs valves were always working and the light kept comming on. OH yes, the cleaner I used was the same one I use for my computer board. Hope it works.
Den
i constantlly had aproblem with my abs and I was told I needed new wiring. This happens during wet weather. I sprayed the connectors at the hubs and blew them out with an air hose. I also sprayed electonic cleaner into the hubs ( don't know if that helps, but I haven't had a problem for 6 mos.
Prior to that my abs valves were always working and the light kept comming on. OH yes, the cleaner I used was the same one I use for my computer board. Hope it works.
Den
S
skruffy
A.b.s. Light Is Not On Now
Thanks for the advice.......I unplugged both front hub and wheel bearing assembly's and sprayed both of them with cleaner as well as the main electrical connection from all four wheels that plugs into the A.B.S. controller and the light has not come on in over a week. Thanks for the advice!!!
Thanks for the advice.......I unplugged both front hub and wheel bearing assembly's and sprayed both of them with cleaner as well as the main electrical connection from all four wheels that plugs into the A.B.S. controller and the light has not come on in over a week. Thanks for the advice!!!