81BlackTTA
New member
- Joined
- Sep 21, 2015
- Messages
- 5
- Reaction score
- 0
- Points
- 0
Hi all, New member here.
I am restoring a 1981 Turbo Trans Am. Progress has been posted up on 301 Garage site being a Turbo.
I just got the motor in and started it with no engine issue per say.
I dont have the computers grounded out thru the dash, though I have run a ground lead to make sure it wasn't an issue. I also dont have the 8 inch AC compressor harness hooked up, but I have grounded it out to make sure that isnt an issue.
I am not getting head lights, parking brake light, any instruments on the dash or dash light. or AC/Heater fan.
What I do get is dome and floor lights, brake lights, choke lights(stays on even when the choke opens up) Windshield wipers buzzard when the key is turned on.
I have a good ground to the chassis showing 12+ volts between the battey and cab. Yet no power to most of the Fuse panel.
I have a new engine harness, AC harness, with all original harness front and rear and CCC for the emission.
Thanks
Tim
I am restoring a 1981 Turbo Trans Am. Progress has been posted up on 301 Garage site being a Turbo.
I just got the motor in and started it with no engine issue per say.
I dont have the computers grounded out thru the dash, though I have run a ground lead to make sure it wasn't an issue. I also dont have the 8 inch AC compressor harness hooked up, but I have grounded it out to make sure that isnt an issue.
I am not getting head lights, parking brake light, any instruments on the dash or dash light. or AC/Heater fan.
What I do get is dome and floor lights, brake lights, choke lights(stays on even when the choke opens up) Windshield wipers buzzard when the key is turned on.
I have a good ground to the chassis showing 12+ volts between the battey and cab. Yet no power to most of the Fuse panel.
I have a new engine harness, AC harness, with all original harness front and rear and CCC for the emission.
Thanks
Tim