iowaboy
New member
- Joined
- Sep 11, 2012
- Messages
- 9
- Reaction score
- 0
- Points
- 0
My air box/ breather has been modified for a holly street dominator intake manifold. It has been shortened so the the scoop attaches directly onto the bottom plate of the breather. Is there a way to make a custom filter bracket to install a filter onto the inside of the hood scoop. Has anyone already done this.
I have seen on jbp Pontiac that you can buy a special breather/ air box for the edelbrock rpm manifold. Thinking it would work until I read that it is for the scoop for the Pontiac engine not the olds. Even tho I have the 400 Pontiac I still have the old scoop.
o well. I'm sure there is a way to make it out of aluminum. Any suggestions?
I have seen on jbp Pontiac that you can buy a special breather/ air box for the edelbrock rpm manifold. Thinking it would work until I read that it is for the scoop for the Pontiac engine not the olds. Even tho I have the 400 Pontiac I still have the old scoop.
o well. I'm sure there is a way to make it out of aluminum. Any suggestions?