Ignition Timing ?

[hfortin2@yahoo.com]

The underhood sticker is missing on the Fiero I'm working on (1987 2.8) and all printed and online materials tell me to refer to it for instructions. I know this is an easy one for someone out there....

 

[Oreif]

The ignition timing for a Fiero with the 2.8L V-6 is 10* BTDC.

 

[hfortin2@yahoo.com]

Bypass or jumper ?

Thanks for your input...one more thing...Is there a bypass wire or a ALDL jumper needed ?

 

[Oreif]

Yes you need to jumper the ALDL to properly set the ignition timing.
In case you don't know it is located under the plastic plate where the lighter is. Just remove the two T-7 torx screws and the ALDL is right there. You short the two pins that are in the corner. (there should be two pins in one corner and a single pin in the other corner.)

______________________________

 

[hfortin2@yahoo.com]

Thanks

Thanks a bunch. This Fiero is running fine now. Aloha...