mmikeman
New member
- Joined
- Mar 8, 2021
- Messages
- 3
- Reaction score
- 0
- Points
- 1
Hey folks, got a 2006 Pontiac Montana when first got the van noticed trans fluid was burnt and somewhat brown, left it for 15,000miles didn't have any issues, decided to do a filter change pan drop the other day about one day after doing this procedure 1st gear began engaging slowly when vehicle was cold only....van would rev but not move fast unless started in 2nd gear, figured I was SOL but then noticed I had refilled the 4t65E trans with Dextron 3 instead of the new Dextron 6 the dipstick and manual call for (my older Pontiacs take 3 and have the same trans), after driving it for a few days contaminated I disconnected the return line and flushed the fluid again and refilled with Dextron 6, now it seems to be a little better but problem still exists, once it warms up no issues at all, do you think using the dex 3 really caused all of this? Or maybe this is just bad luck from doing the flush and something clogged up somewhere. Do you think I need to use a machine at this point to completely flush everything out or would me flushing and refilling be enough for now