Hi there, I am replacing the exhaust and I was wondering what stud bolts were. I am going to guess that they are what bolt the front and intermediate pipe to the cat. I think I saw six holes altogether. Thanks ahead of time!
1998 sunfire exhust
- Thread starter mich04
- Start date
My system is welded so I am replacing all the way to the header. Also this is the diagram I am using. http://info.rockauto.com/AP/Detail2.html?15150.jpg
- Joined
- Dec 8, 2008
- Messages
- 25,770
- Reaction score
- 701
- Points
- 113
bolts are obviously round threaded metal with a head usually in the shape of a hexagon. A stud has no head. In you diagram the studs connect the exhaust manifold to the pipe and are on the extreme left side of the diagram.
sorry I don't know why I said stud bolts I am just trying to figure out what I should use to connect my cat to my front pipe and my intermediate pipe. The ones on the far left are a bolt and spring but it does not say what to use the cat. The only other thing Rockauto has on their website in the exhaust section are these
http://www.rockauto.com/catalog/moreinfo.php?pk=1302278
Where do these fit into things?
http://www.rockauto.com/catalog/moreinfo.php?pk=1302278
Where do these fit into things?
______________________________
I don't know why I said stud bolts, I am just trying to figure out what I am supposed to use to bolt on the cat and both pipes. The ones on the far left are bolts with springs, the only other thing in Rockautos exhaust section are these. http://www.rockauto.com/catalog/moreinfo.php?pk=1302278
Are these what I use?
Are these what I use?