joeshannallie
New member
- Joined
- Mar 10, 2012
- Messages
- 7
- Reaction score
- 0
- Points
- 0
The fans have stopped working and I have tried everything possible to get them working. They just will not work. I have replaced the relays and the coolant temp sensor. I tested both fans with a "hot" wire and they both work fine. So what is there left to do. The heat gauge will sometimes go up toward 3/4 ways and then it will drop down to what I call normal about 1/4 ways on the gauge. I was told the only other thing it could be is the pcm. Does this sound right? A intake gasket or head gasket would not cause the fans to not kick on, Would it? The fan does not run with the A/C on. I am lost with this one. If any one knows anything else at all to check please reply.
If I run a toggle switch to the fans which one should I run it to. DO both need to run at the same time? I will be using to A/C if that matters.
If I run a toggle switch to the fans which one should I run it to. DO both need to run at the same time? I will be using to A/C if that matters.