Head bolts torque

J

joker96

New member
Joined
Aug 25, 2012
Messages
32
Reaction score
0
Points
0
hi
i will attempt to ensemble an engine for this car but i dont have the exact order or torque specifications to do so. i dont have the factory service manual. can someone with the manual or knowledge help me out? thanks in advance
 
the long bolts torque to 46 ft lbs and the shorts to 43 ft lbs,second pass is 90 degrees ....that means you need an angle meter and those are torque to yield bolts so must use new head bolts.
______________________________
 
This is how ill do it, in that order as in the pic ill oil all bolts and hand tight all of them then torque to 20 in that order when done ill torque to those specs you said and as a final step an additional 90 degree. Would that work?? Thanks a lot for the info.
 
Great, any additional tips for installing the head and timing kit?
 
are you going to mess with the lifters or push rods ?
______________________________
 
Tighten the timing chain tensioner bolts to 24 N·m (18 lb ft).
Tighten the camshaft sprocket bolt to 130 N·m (96 lb ft).
just make sure your mark on the cam and crank sprocket marks line up with each other.
 
How mUch preassure should i torque those lifter rods things?? Sorry dont know the correct names. Also does the sprokets have marks? What should they match with?? Each other?
 
Great thanks for the info and the pictures
______________________________
 
torque the rocker arms to 22 ft lb,if you take out the push rods put them back the same,your exhaust and intake are diff lengths.
 
Really?! I thought they where all the same length. Damn do you happen to know the order the go?
 
Ok great. Thanks a lot.
______________________________
 
You must log in or register to reply here.

Share this page

Back
Top