M
mdterps4lyfe
i jus bought a 2000 trans am and the head lamp motor on the drivers side went bad...anyone know how to replace it?
Please consider whitelisting my site in your ad blocker. If you must keep it running here, please support this endeavor and select a support plan - which starts at only $0.16 cents per day. I'm not asking for much. I just need a little help. Thank you. Click here to select a support plan.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
S
SilverWS6
I have had the same problem. I recently bought a 99 TA WS6. It has the same problem. My switch went out. I have had the assembly out but the switch and the motor are one unit. The best advice I can give you is get a Haynes manual for the car. It will step you through the process.
1BADLT-1
New member
does it make this god-awful noise when u turn the lights off? if so i had the same problem with my 97 WS6 T/A all i did was remove the motor assembly and took it apart to get to the gear inside. i turned the gear 180 degrees so the good teeth were in contact with the motor and havent had a problem since.
S
SilverWS6
I never thought of that. Thanks for the idea.
______________________________
O
ootaw/ evil twin
be carefull
find out what caused the gear to round off in the first place i had the same problem on the passenger side. turns out one of the support arms was binding and the gear rounded again, so now i need to get a new gear.
find out what caused the gear to round off in the first place i had the same problem on the passenger side. turns out one of the support arms was binding and the gear rounded again, so now i need to get a new gear.
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.