HI i have a 1999 Pontiac sunfire 2.2, i just ordered a set of 10,000k HIDs 9007. i went to install them in my car they are plug and play so i put the bulb in connected the ballast and plugged them in to the factory headlight harness like it said to do (by the way they are bi exon so HID buld and exon bulb for high beams) went to start the car and i noticed that the high beam light on the dash was on but the lights were not hit the switch for high beams and the exon lighhts for high beams came on. but i have no low beams (the HID bulb). i was wondering if any one could give me some insight. i have high beams but no low beams(hid bulbs) also no drl. but if i put the stock bulbs back in everything works fine. any one got some advice??
HID conversion
- Thread starter carfreak4
- Start date
Having sold these kits I can tell you most are not Hi/low they are one or the other. Honestly you do not need the hi beams with HID anyway. As for the indicator light on the dash make sure you used the correct wire to hook them up...
Had the same problem with my 2001 sunfire, if its just one tht plugs into the factory bulb outlet it won't turn on because the plugs switch between ground and power so what I did was wire it to the blinker lights for the power and to the outlet for ground, it won't be able to go to a high beam but it will turn on wen u turn on the lights
______________________________
JefferyNewton
New member
- Joined
- Jun 30, 2013
- Messages
- 2
- Reaction score
- 0
- Points
- 0
hello friend sorry for old thread reply but I am looking to get new light kits of my pontiac sunfire. So can you please share short review on kits you got or any other best suited option?Waiting for reply.. Thanks in advance
Last edited:
- Joined
- Dec 8, 2008
- Messages
- 25,766
- Reaction score
- 701
- Points
- 113
why is your email address eleni.xxxx@buyhidkits.com ?