G
gdun36
...won't start? the problem is the fuel injector will not pulse.the computer is good..the ignition module is good any ideas...
Please consider whitelisting my site in your ad blocker. If you must keep it running here, please support this endeavor and select a support plan - which starts at only $0.16 cents per day. I'm not asking for much. I just need a little help. Thank you. Click here to select a support plan.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
C
cat lady
If you are getting spark, then the problem is you are not getting gas. It could be the fuel pressure regulator or fuel pump.
If you are getting gas but no spark and you have checked the module, you might want to check the coil or distributor.
If you are getting gas but no spark and you have checked the module, you might want to check the coil or distributor.
D
Danie
crank sensor is what pulses the injector,make sure you have a good connection at the module.
P
plumberwill
if the injectors won't pulse one maybe bad . the coil in the injector might b shorted. i would ohm them and c if one is bad