I have an 03 Sunfire and the low beam and high beam lights or daylight running lights don't come on on the driver's side

[Kbil23]

When I put my 03 Sunfire in gear, the daytime running light display on the dashboard blinks and clicks the service light comes on. The daylight running light, low and high beam lights do not work on driver's side. Changed bulbs but still not operating. Passenger side works fine. Any solutions?

 

[melsg5]

You need to have the car scanned for the service light.
Did you look in the owners manual to see if there is a separate fuse for the driver's side?
Did you check the bulb socket with a test light or voltmeter?

 

[Kbil23]

Will have that checked out. Also there is wire splice coming from the daylight running light corrosion module in between the headlight and battery, a blue wire with a pink wire. The anode 1 and 2 lights are blinking on the module. Would you know what that means? Thanks

 

[melsg5]

Did you make typos above, what is a daylight running light corrosion module? Also anode lights?
Can you post a picture of what you are referring to?

______________________________

 

[Kbil23]

I am posting a picture of the module. The 2 lights blinking are anode 1 and anode 2. Also pic of red and black wire spliced together.

 

[melsg5]

that is not a factory system and I have never seen anything like it.
based on the installation instructions on the link below it should have nothing to do with your headlights.
Are you sure they spliced it into a headlight wire if they did I would remove the device and repair whatever they did to the factory wire harness.
The Auto Saver System