• 🔍 Like our community? You can tell Google to show you results from this site more often. Just Click Here and then click the empty checkbox on the right side of our name.

The heating doesn't work in my 2001 Pontiac Montana.?

As an Amazon Associate we earn from qualifying purchases.
View on Social Feed
I don`t have a current subscription for an `04 van, but there is no TSB for my 06. I did have to do this to my `03 Montana. So somewhere in there they have fixed the issue.
But, if you are not getting adequate air flow in your `04 on the vent setting, then you may want to try this fix.
 
Hello, I know this subject was talked about. I have a 2000 P montana with heat problems. I followed the directions posted. Once I got the glove box off I got completely got lost. Is there any pictures someone can post or send to me. Or explain in detail what am i looking for. Thankyou
 
hey buddy im having about the same issue. I have a 2000 Montana, the air through the vent is minimal on heat and perfect on cool. the actuator I see , after removing the glove box controls the mode selecting and I couldn't get it to change the CFM of air during the heat coming from the vent.
 
heating doesn't work in my 2001 Pontiac Montana.?

I am having a similar issue. I am going to attempt the same repair but, I was unsure if I am to reconnect the power to the acutator or not. Also, am I suppose to just disgard the mode door lever that I remove?

Any feedback would be greatly appreciated.

Thanks,

Joe
 
Having the same issue with 2002 Silhouette. I am going to try the same fix. Am I suppose to plug the power back into the actuator when I am finished? Do I just discard the arm that I remove?

Any comments are greatly appreciated.
 

Share this page

Back
Top