The car idles low it seems and it dies when in reverse or drive(when no pressure is applied to the gas pedal) but it starts right back up with no hesitation, sounds like it may be the timing? new distributor cap and rotor, new spark plugs/wire, new battery, new fuel pump. tried adjusting the distributor and it turns with little effort. would the timing reset after putting on the new dist. cap and rotor? seems to be having the same problem as before i put the new cap on. starts up, idles but idles rough like not firing right, then dies in reverse or drive. but once i apply the gas it has no hesitation to go, and it cruises very smooth. how hard is it to adjust the timing myself?
also, i asked the advise of a mechanic who seemed knowledgeable and he said it may be the timing and if you turn the distributor clockwise it will adjust the firing speed and it wont continue to stall. tried this but it seems the range the dist will turn is from 7'o clock to 2'oclock and even at 2'oclock it still stalls.
boy i've tried everything
anyone have any ideas? maybe using a timing light to get it exact?
also, i asked the advise of a mechanic who seemed knowledgeable and he said it may be the timing and if you turn the distributor clockwise it will adjust the firing speed and it wont continue to stall. tried this but it seems the range the dist will turn is from 7'o clock to 2'oclock and even at 2'oclock it still stalls.
boy i've tried everything
