Back window
- Thread starter Gene53
- Start date
No I didn't think of them, great suggestion and I will try that. The places I have tried don't want to attempt it for fear of failure.
cammerjeff
Well-known member
There is a GM TSB on this issue. I have spoke to several Solstice and Sky owners who have done this repair and it has worked out well for them. They just caution to mask off the top and window as the 3M sealant is hard to remove if it gets on the top!!!!! I have attached the TSB
They all said it was easy to do, they used blocks of wood to keep the window in place while the sealant dried, they all said they did it with the top up and latched. They say just take your time and clean the area the sealant goes well.
I have not needed to do this yet, but I suspect I will eventually. Good Luck
They all said it was easy to do, they used blocks of wood to keep the window in place while the sealant dried, they all said they did it with the top up and latched. They say just take your time and clean the area the sealant goes well.
I have not needed to do this yet, but I suspect I will eventually. Good Luck
______________________________
Thank you very much, I will have to try this. I think someone did a poor job reattaching this before. I live in Florida and my garage gets up to 100° fairly often with the doors closed. I'm sure that contributed to the failure.
G
G-405614
I have the issue of my top not drawing up tight! I can’t even drive my solstice!
cammerjeff
Well-known member
I would need some more info to try and help you out, also pictures of what is happening would help. It could be a cable issue
- Joined
- Dec 8, 2008
- Messages
- 25,798
- Reaction score
- 703
- Points
- 113
It's a guest, unless they come back to look they wont know you responded.
______________________________