mikecnewyork
New member
- Joined
- Sep 8, 2014
- Messages
- 9
- Reaction score
- 0
- Points
- 0
Hi guys. New to this forum. Recently purchased a 66 Lemans and started doing the front drum brakes and immediately noticed that 3 of the front wheel studs were very loose and was actually spinning on the hub as I tried to remove the lug nut. Luckily I was able to get it off. Tried picking up OEM studs but the holes on the hub are too big now and the studs do not fit tight. No one local has these hubs, so I ordered them from the OPGI website, although it will be 2-3 weeks before I can get them and in the meantime I had a local shop this morning weld the stud heads lightly so I can run temporarily. Now I am having second thoughts about the welds. Has anyone had experience with a situation like this? Any help or opinions is appreciated.
