I got a 07 Pontiac Montana 3.9L V6 OHV 12-valve. Was driving and just lost all gears. I wait a bit once kinda cooled down and it'll engage again but only for a little while.
So far ive cleaned the throttle body, checked fuses and wires, everything is very clean but still same in the end not going into gear or even selecting one.
I got the codes P1516 Throttle Actuator Control, P2101 ECM Tac went out of range, P1692 Driver 5 line 2.
Any tips on what to check or even how to go about this myself? Im very new to repairing things myself so figured id ask around before throwing money around. I thank any response in advance.
So far ive cleaned the throttle body, checked fuses and wires, everything is very clean but still same in the end not going into gear or even selecting one.
I got the codes P1516 Throttle Actuator Control, P2101 ECM Tac went out of range, P1692 Driver 5 line 2.
Any tips on what to check or even how to go about this myself? Im very new to repairing things myself so figured id ask around before throwing money around. I thank any response in advance.