Please consider whitelisting my site in your ad blocker. If you must keep it running here, please support this endeavor and select a support plan - which starts at only $0.16 cents per day. I'm not asking for much. I just need a little help. Thank you. Click here to select a support plan.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
what kind and what size is the bolt holding the caliper onto a 2005 pontiac grand am?
- Thread starter Richard
- Start date
ramcharger
New member
- Joined
- Apr 27, 2010
- Messages
- 6
- Reaction score
- 0
- Points
- 0
if you have one missing take one off the opposite side and measure as i think '09 was last yr. for pontiac dealers,but one that was formerly a dealer can help.
Country Boy
New member
- Joined
- Feb 7, 2010
- Messages
- 6
- Reaction score
- 0
- Points
- 0
A word to the wise! Buy a replacement from a GM dealer because they're specially hardened. Run of the mill hardware and auto parts stores carry soft grade 3 or 5 and Lowes carries a few stainless steel bolts which are "really" soft.
Most people think stainless is hard but that's not the case at all. It's "tough" to machine and doesn't work harden easily. It's soft on a hardness tester. Stainless bends easily.
Most people think stainless is hard but that's not the case at all. It's "tough" to machine and doesn't work harden easily. It's soft on a hardness tester. Stainless bends easily.