77 TA Won't Crank

Found it. A coat hanger is holding it in place. There is no linkage from the column down.
 
Last edited:
Wow, so the NSS is worthless.
Remove the two connectors from the NSS.
With the car in park and the key in the run position take a small section of electrical wire and connect the two wires from either connector together. One of them should cause the white backup lights to come on. The other should allow the starter to engage.
 
I got a linkage arm from my daughter's '81 Trans AM. About to try to install it. Is there a particular gear it should be in?
 
Not sure if it makes a difference but Park would be my choice
______________________________
 
THANK YOU SO MUCH melsg5.
The NSS wasn't installed correctly and I put it in the center position and boom baby!
 
Excellent, it was quite frustrating for me to correctly explain what i felt was the problem. I knew you didn't have to take the column out and there was no way you fried the NSS. The clue was you noticing that the shifter moved.
 
You must log in or register to reply here.

Share this page

Back
Top